home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / mods_all.zip / DT112T < prev    next >
Text File  |  1992-09-15  |  3KB  |  73 lines

  1. DT112T
  2.  
  3. Date: 21 Oct 90 03:46:57 UTC (Sun)
  4. From: wa2ise@kd6th.nj.usa.na (Bob)
  5. Message-ID: <39294@KD6TH.NJ.USA.NA>
  6. Reply-To: wa2ise@wa2ise
  7. To: mods@allbbs
  8. Subject: DR112t mod file
  9.  
  10.  
  11. copied from UUCP and edited:
  12. Keywords: Alinco DR110T DR112T
  13.  
  14. This is just to confirm that the modification that was posted to the
  15. Alinco DR110T also works on the DR112T (same radio, but with an LCD
  16. display as opposed to the DR110T's LED display).  Pop the cover, cut
  17. one wire, reset the radio, and PRESTO!  Instant expanded coverage.
  18.  
  19. I verified that the radio will receive the National Weather Service.
  20. However, I haven't tried listening to the 300 MHz or 800 MHz segments
  21. the radio now covers.  I have no idea how well (or how poorly) the
  22. receiver performs at those frequencies.
  23.  
  24. Andre Molyneux KA7WVV 
  25.  
  26. for reference, here is the DR110 mod file:
  27.  
  28. After installing the out-of-band receive mod on my Alinco 110, I
  29. accidentally pressed a couple of keys and found I could receive
  30. from:
  31.                   130 -> 170 MHz + Xmit of this range
  32.                   340 -> 380 MHz - no Xmit
  33.                   870 -> 890 MHz - no Xmit
  34.  
  35. To modify the Alinco to receive out of band, perform the
  36. following steps:
  37.  
  38. Remove the top cover by removing the obvious screws. Be careful,
  39. as the speaker may stick to the cushion on the top cover. If it
  40. does, separate the speaker from the top panel and replace it back
  41. in its receptacle within the rig.
  42.  
  43. Positioned at the front of the rig, look near the tuning knob and
  44. you will see a little yellow jumper coming from behind the front
  45. panel, looping around and returning to the front panel. This
  46. jumper looks like it should have a tag on it saying 'cut me for
  47. more features'. Go ahead and take the wire cutters to this jumper.
  48. Be careful that the cut ends don't short to something!
  49.  
  50. Replace the top cover on the rig, get everything set back up and
  51. turn on the rig.
  52.  
  53. The next step is to reset the radio. If you don't remember its
  54. current programming, you may want to write it down at this time.
  55.  
  56. When ready to reset the rig, hold down the F key and the VFO/M
  57. key at the same time, turn the POWER off, back on, and then let
  58. go of the keys. The rig is reset and will display 144.00.
  59.  
  60. You will now be able to tune around, and transmit, from 130.00 ->
  61. 169.99 MHz.
  62.  
  63. To move to the next 'band segment', press F and then the MHZ key.
  64. The display will go the 340.00 MHz segment. F+MHZ again will get
  65. you cellular, and F+MHZ a third time will return you to the 2
  66. meter segment. Happy monitoring...
  67.  
  68. Gene - AA6IY @ N6LDL
  69. ================================
  70. Note: I haven't tried or verified this, proceed at your own risk.  WA2ISE
  71. And don't transmit out of band!
  72.